VD54, 55, 56, 59 (calibres without date window) :
1) Pull out the crown when the second hand is at the 12 o'clock
position. The second hand will stop on the spot.
2) Set the hands to the desired time of the day by turning the
crown
VD54, VD56, VD59 : make sure AM/PM is set correctly
* Do not press any button, otherwise the chronograph hands will move.
3) Push the crown back to the normal position in accordance with a time signal.
* The measurement time is indicated by the stopwatch hands that move independently of the center hands (and
24-hour hand where applicable).
* The stopwatch can measure up to 60 minutes
* The stopwatch measures in 1/10 second increments. (VD50, VD55, VD56, VD57, VD59)
Standard measurement (e.g. 100m race)
Press the buttons in the following order :
HOW TO USE THE STOPWATCH
set the time
Button A
(START)
Button A
(STOP)
Button B
(RESET)
Accumulated elapsed time measurement (e.g. basketball game)
Split time measurement (e.g. 5,000m race) (this function is not available in VD50)
* Restart and stop of the stopwatch can be repeated as many times
as necessary by pressing button A.
Button A
(START)
Button B
(SPLIT)
Button B
(SPLIT RELEASE)
Button A
(STOP)
* Measurement and release of the split time can be repeated as many
times as necessary by pressing button B.
Button B
(RESET)
Button A
(START)
Button A
(STOP)
Button A
(RESTART)
Button A
(STOP)
Button B
(RESET)
www.hardingwatches.com
