Hardi RANGER EAGLE, Original Instruction Book

Page: 64 / 100

6 - Maintenance
64
10 hours service - Cyclone Filter
To service the Cyclone filter
1.
Close the suction valve and close the pressure valve.
2.
Unscrew filter lid (A).
3.
Lift the lid and filter (B) from housing.
4.
Turn the two locks (C) outwards to unlock the filter from the lid.
5.
Separate filter from the integrated filter guide in the lid and clean
the filter.
To reassemble
1.
Grease the two O-rings on the lid/filter guide. Due to small space
at lid for example use a brush to grease with.
2.
Mount the filter onto the recess (which may not be greased) in the
lid/filter guide.
3.
Turn the two locks (C) inwards to lock the filter to the lid.
4.
Place the filter/filter lid into housing and screw the lid until it hits
the stop.
±
WARNING! Always wear protective clothing and gloves before opening the filter!
€
DANGER! Both the suction valve and pressure valve must always be closed before opening the Cyclone filter! If not
then spraying liquid can hit you when opening the filter and drain the main tank content!
10 hours service - Brakes (optional)
Apply brake pedal and check function of trailer brakes.
10 hours service - Brakes air tank (optional)
Drain the air tank for condensed water at the drain valve.