Hardi NK SB Series, Instruction Book

Page: 111 / 122

8 - Technical Specifications
111
Voltage
The sprayer is designed for the following voltage only:
* The blade fuses usually allow up to 50 A for a few seconds before blowing.
€
DANGER! If the tolerances for voltage are exceeded, the electrical system can fail. Risk of fire. Risk of defect or
malfunctioning components.
Airborne Noise Emission
Airborne noise emission from operating the sprayer relates to the two defined operator positions (in the tractor cab or
operating the chemical incorporator/filling device/ChemFiller). Reference measurements indicate only in the latter case
(operating the chemical filling device) a contribution from the sprayer of additionally 4 dB(A).
Filters
*depending on selected nozzles
**not with PrimeFlow system
Technical Residue
Residue in the dilutable volume is mentioned in the table below.
The non-dilutable volume varies depending on the boom width and installed options in the fluid system.
Voltage 12 V DC
Tolerance for voltage - 1.5 V / + 3.0 V
Blade fuses 25 A *
Filter
Mesh Gauze width Color In-line** Tank strainer Nozzle
18 1.00 mm White - - - Yes -
30 0.58 mm Green Yes - - - -
50 0.30 mm Blue Yes, standard - Yes* - Yes*
80 0.18 mm Red Yes Yes Yes* - Yes*
100 0.15 mm Yellow - - Yes* - Yes*
Sprayer combination Dilutable volume for tank and fluid system
Main tank: 600 litres
Boom width: 12 meters
6 litres
10.5 15.0 12