Hardi Delta Force Boom, Operator'S Manual

Page: 40 / 56

6 - Maintenance
38
Horizontal Alignment of Breakaway Section
Complete the following steps to adjust the breakaway to align it with the outer section of the boom.
˜
ATTENTION! Before making adjustments, Locktite 638 (or
equivalent) must be added between the bolt holes on bracket (B)
to ensure that the bracket (B) does not move after adjustment.
1.
There are four sets of bolts and nuts (A) in all, mounted in both
sides of the steel bracket (B). Wrench = 17 mm.
In the picture, the bolt and nut are already removed from one hole.
The slotted holes in the steel bracket allow adjustment. The steel
bracket is attached to the breakaway
2.
Align the breakaway with the outer section by moving the bracket.
3.
Retighten the bolt and nuts. Torque = 130 Ft/lb (180 Nm).
Adjustment is completed.