Hardi COMMANDER Classic PRO, Instruction Book

Page: 29 / 96

4 - Sprayer setup
4.5
8. To ensure long life of the transmission shaft, try to avoid working
angles greater than 15°.
SELF TRACK
2. Attach safety chains to top link clevis (A). The chain will prevent
the transmission shaft from being damaged if the lift arms are lowe-
red too far. Adjust the chain length so the chains are tight when the
tractor P.T.O. and pump shaft are in a horizontal line.
3. Tighten the lift arm stabiliser chains.
ATTENTION! If possible, lock the tractor hydraulic lever when
the lift arms are in the correct position to avoid the sprayer
weight resting on the stabiliser chains.
To prevent hoses and wiring from being damaged by the tractor
wheels, P.T.O. shaft etc. all hoses, cables and wires are held by the
hose bracket fitted to the sprayer platform. Check that the length of
the hoses and cables are sufficient by tight turns.
DANGER! Do not stand in the area around the drawbar during
manoeuvring.
SELF TRACK for COMMANDER 2200/2800 is connected as follows:
1. Attach the tractor lower links in the two mountings of the SELF
TRACK. Adjust the length of the drawbar if necessary - to obtain the
best tracking, choose the setting where the distance (X) is equal to
distance (Y). Secure with linch pins.
Hose package support