Hard Wire TREMOLO/ROTARY TR-7, Owner'S Manual

Page: 8 / 24

4
input is needed, this jack must be used. Signals will still be heard
at both outputs when only the Input 1 (Mono) jack is connected.
Connecting a guitar cable to the Input 1(Mono) jack supplies bat-
tery power even though the Indicator LED may not be lit. To pro-
long battery life, disconnect all cables from the pedal when not in
use. If the optional PS200R power supply is used for power, the
input can remain connected.
Input 2 7.
- Connect a second pedal’s output to this jack for stereo
operation. Inputs 1 and 2 are fed through the stereo Tremolo/Rotary
effects and then to Outputs 1 and 2 and will keep true stereo sepa-
ration between channels.
NOTE
: When the Rotary type is selected
and the effect is on, this input is summed with Input 1 and then fed
through the Rotary effect.
Foot Switch Release Pins 8.
- These two pins are spring-loaded
hinges that hold the pedal in place. Push these pins in with the tip of
a 1/4” guitar cable to release the pedal from the pedal chassis expos-