background image

 

HA1712-UM 

Rev NI 

April 30, 2020 

 

User Manual 

 

Page 12 of 12

 

5 Year Inspection 

After every 5 years or after an inflation event the IFD is to be returned to Harbour Air for inspection and 
recertification. 

 

WARRANTY 

Warranty Period:  One year: Inflatable flotation (Industrial/Commercial Use) 

What our warranty covers:  

Products with defects in materials or workmanship will be replaced or repaired at the discretion of 
Harbour Air for the defined warranty period of the product. 

The warranty excludes products damaged due to normal wear and tear, unauthorized modifications or 
alterations, improper use, improper maintenance, accident, misuse, negligence, damage, or if the 
product is used for a purpose for which it was not designed, or used not in accordance with the product 
instruction. Unauthorized product modification automatically voids the Harbour Air warranty. Damage 
due to wear and tear may be repaired at a reasonable charge. 

Harbour Air will use reasonable discretion to determine the validity of warranty claims. Each situation is 
different and is up to the discretion of Harbour Air to determine whether a product has a manufacturing 
defect or if it is suffering wear and tear. In the case that a product does have a manufacturing defect 
deemed by Harbour Air and is repairable, Harbour Air may choose to not replace but to repair the 
product free of charge. The decision on whether to repair or replace a product is solely up to the 
discretion of Harbour Air. 

The warranty applies to the original purchaser only and proof of purchase is required. Harbour Air 
products purchased from unauthorized retailers, online auction sites, or as second-hand items are not 
covered under warranty. 

The only obligation or liability of Harbour Air under this limited warranty is to repair or replace the 
product and Harbour Air shall not, under any circumstances be liable for loss of use or any 
consequential damages sustained by the Customer. All other warranties expressed or implied, and 
remedies with respect to the condition or use of the product, which might otherwise be provided by law 
in any jurisdiction, are specifically excluded. 

This warranty applies to commercial products. The warranty for products supplied under government 
contracts depends solely on the warranty agreed to as part of that contract.

 

CONTACT 

Have a question for our team?  Contact us at: 

Harbour Air Aerospace Services Ltd. 
c/o Purchasing Department 

 

#186 

– 5400 Airport Road South, 

 

Richmond, BC 

 

V7B 1W4 

 

604-270-1107 ext 3598 

Summary of Contents for HA1712-UM













Reviews: