1 0
Getting Started
UNPACKING
• Packaging materials:
This appliance has been packaged to protect it against transportation damage.
Remove all packaging materials from around and inside the appliance including the bottom cushions,
foam pads, tapes inside the chiller, tear off the protective film on the door and the chiller body. Keep
the original packaging carton and materials in a safe place. It will help prevent any damage if the
product needs to be transported in the future, and you can use it to store the appliance when it is not in
use. In the event the carton is to be disposed of, please recycle all packaging materials where possible.
• Check:
to see if all items are present.
• Inspect:
the equipment and accessories for transport damage. In case of complaints, the supplier is to
be informed immediately.
•
Suffocation:
Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all
packaging materials are out of their reach and disposed of safely.
• Power cord:
Unwind the power cord to its full length and inspect it for damage. Do not use the
appliance if it or its cord have been damaged or are not working properly. In case of damage, contact
our after sales support line for advice on examination, repair or return of the damaged product.
• Read the manual:
Read this manual to familiarise yourself with the appliance. Pay particular attention
to the safety instructions on the previous pages.
• Clean:
To remove any dust from transit and storage, clean the interior and exterior surfaces of the
appliance with lukewarm water and a soft cloth. Dry thoroughly.
Important:
do not use harsh or
abrasive detergents or powders as these will damage the finish.
FIRST USE
Before turning on your Beverage Chiller for the first time:
• The chiller must be rested for at least half an hour before connecting power.
• Clean up the inner chamber with lukewarm water and a soft cloth.
• Do not connect chiller to electronic energy saving plug and converter that can convert DC into AC
(E.g.: solar energy system. ship grid).
• Water drop or frost will be generated on back side of Beverage Chiller when compressor is running.
This is a normal function of chiller, wiping out frost or water drop is not required as they will evaporate
automatically. The defrosted water will be collected into drain tank and then inflow into water disposal
pan above the compressor and vaporized.
