Page 2
For technical questions, please call 1-888-866-5797.
Item 56514
Specifications
Batteries Required
4x “AA” Batteries (for Truck)
2x “AA” Batteries (for Remote)
Frequency
27 MHz
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Important Safety Information
1.
Changes or modifications not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
2.
Follow basic safety precautions to
reduce the risk of personal injury and/
or damage to the product during use.
3.
Do not allow children younger than
age 6 to use this Truck.
Children should
not operate without adult supervision.
4.
Keep out of reach of children younger
than 3.
Contains small parts that
may present a choking hazard.
5.
Keep spectators and pets away.
Spectators
should only watch from a safe distance.
6.
Do not mix old and new batteries.
Do
not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
Position batteries in proper polarity. Do
not use swollen or leaking batteries.
7.
Do not open the Truck’s housing or
modify its design.
Doing so may cause
damage and/or make it dangerous.
8.
Do not use if parts are loose
or damaged.
If the toy has been
damaged, immediately stop using it.
9.
Only use outside or in large,
enclosed area.
Do not drive near open
flames, pets, or delicate furniture.
10.
If you lose control of the Truck,
release the switches.
11. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
12. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Assembly
Unpacking
1. Carefully slide the cardboard support
containing the Truck out of the packaging.
2. Remove the Remote.
3. Remove the Truck from the cardboard. If
any part does not slide out easily, stop and
clear the obstruction before proceeding.
