Page 8
For technical questions, please call 1-888-866-5797.
ITEM 56736
Troubleshooting
TO PREVENT SERIOUS INJURY: Use caution when
troubleshooting a malfunctioning jack. Stay well clear of the
supported load. Completely resolve all problems before use.
If the solutions presented in the Troubleshooting guide do not solve the problem, have a qualified
technician inspect and repair the jack before use.
After the jack is repaired: Test it carefully
without a load by raising it and lowering it fully, checking for proper operation, BEFORE
RETURNING THE JACK TO OPERATION.
DO NOT USE A DAMAGED OR MALFUNCTIONING JACK!
POSSIBLE SYMPTOMS
PROBABLE SOLUTION
(Make certain that the jack is
not supporting a load while
attempting a solution.)
Jack will
not lift at
its weight
capacity
Saddle
lowers
under load
Pump
stroke
feels
spongy
Saddle
will not
lift all
the way
Handle
moves up
when jack
is under
load
Oil
leaking
from fill
plug
X
X
Check that Release Valve
is closed fully.
X
X
X
Valves may be blocked and may not
close fully. To flush the valves:
1. Lower the Saddle and securely
close the Release Valve.
2. Manually lift the Saddle
several inches.
3. Open the Release Valve
and force the Saddle down
as quickly as possible.
X
X
X
Jack may be low on oil. Check
the oil level and refill if needed.
Jack may require bleeding - see
instructions on page 4.
X
Unit may have too much
hydraulic oil inside, check fluid
level and adjust if needed.
