Page 2
For technical questions, please call 1-888-866-5797.
Item 59249
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
To reduce the risk of FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
1. Use only insulated staples or
plastic ties to secure cords.
2. Route and secure cords so that they
will not be pinched or damaged when
the cabinet is pushed to the wall;
3. Position the portable cabinet light with respect to
the cabinet so the lamp replacement markings
are able to be read during relamping;
4. Not intended for recessed installation
in ceilings, or soffits; and
5. The National Electrical Code (NEC) does not permit
cords to be concealed where damage to insulation
may go unnoticed. To prevent fire danger, do not
run cord behind walls, ceilings, soffits, or cabinets
where it may be inaccessible for examination.
Cords should be visually examined periodically and
immediately replaced when any damage is noted.
6. Install only according to these instructions.
Improper installation can create hazards.
7. Avoid electric shock. Keep plugs and receptacles
dry. Use only on GFCI-protected circuits.
8. Not suitable for damp locations.
9. Wear ANSI-approved goggles and heavy-
duty work gloves during installation.
10. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
11. Do not operate the Light in explosive atmospheres,
such as in the presence of flammable liquids,
gases or dust. The Light generates sparks
which may ignite the dust or fumes.
12. Do not abuse the Power Cord. Never use the Cord
for unplugging the Light. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
13. Maintain the Light. Check for breakage of
parts and any other condition that may affect
the Light’s operation. If damaged, have it
repaired before use. Many accidents are
caused by poorly maintained items.
14. Maintain labels and nameplates on the
Light. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
15. This product is not a toy. Keep it
out of reach of children.
16. Do not install directly over a heat source (stove, etc.).
17. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
18. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
