Item 66984
For technical questions, please call 1-888-866-5797.
Page 5
4.
Use tools with the lowest vibration when
there is a choice.
5.
Include vibration-free periods each day of
work.
6.
Grip tool as lightly as possible (while still
keeping safe control of it). Let the tool do
the work.
7.
To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
SAVE THESE INSTRUCTIONS.
Symbology
n
o
No-load speed
.../min
Revolutions or reciprocation per
minute
PSI
Pounds per square inch of pressure
ft-lb
Foot-pounds of torque
BPM
Blows per minute
CFM
Cubic Feet per Minute flow
SCFM
Cubic Feet per Minute flow at
standard conditions
NPT
National pipe thread, tapered
NPS
National pipe thread, straight
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
eye protection.
WARNING marking concerning Risk
of Hearing Loss. Wear hearing
protection.
WARNING marking concerning Risk
of Respiratory Injury. Wear NIOSH-
approved dust mask/respirator.
WARNING marking concerning Risk
of Explosion.
Use only clean, dry, regulated,
compressed air to power this tool.
Do not use oxygen, carbon dioxide,
combustible gases, or any other
bottled gas as a power source for
this tool.
