background image

Page 3

For technical questions, please call 1-888-866-5797.

Item 65594 65595

Pressurized Tank Handling Safety

PRESSURIZED TANKS CAN EXPLODE WHEN DAMAGED.

1. 

Protect pressurized or closed tanks from 
heat, being struck, physical damage, 
flames, and sparks.

2. 

Always use proper procedures to 
move pressurized tanks.

Personal Safety

1. 

Stay alert.  Watch what you are doing and use 
common sense when filling or using the air tank.  
Do not fill or use the air tank while tired or under 
the influence of drugs, alcohol, or medication.

2. 

Always wear eye protection.

  

Wear ANSI-approved safety goggles.

3. 

Always wear hearing protection when using 
the air tank.

  Prolonged exposure to high 

intensity noise is able to cause hearing loss.

Use Safety

1. 

Keep the air tank when it is full out of reach of 
children and other untrained persons.

   

A air tank is dangerous in the 
hands of untrained users.

2. 

Check for breakage of parts and any other 
condition that affects the air tank's operation.   

If damaged, have the air tank serviced before using.   
Many accidents are caused by poorly 
maintained air tanks.  There is a risk of 
bursting if the air tank is damaged.

Service

1. 

Air tank service must be performed 
only by qualified repair personnel.

2. 

When servicing a air tank, use only identical 
replacement parts.  Use only authorized parts.

3. 

Maintain the air tank with care.

4. 

Safely discharge all air pressure from the 
air tank before storing the air tank.

Air Source

1. 

Never connect to an air source that is 

capable of exceeding 200 psi.

  

Over pressurizing the air tank may 
cause bursting, abnormal operation, 
breakage of the air tank or serious 

injury to persons.  Use only clean, dry, regulated 
compressed air at the rated pressure or within the 
rated pressure range as marked on the air tank.  
Always verify prior to filling the air tank that the air 
source has been adjusted to the rated air pressure or 
within the rated air-pressure range.

2. 

Never use oxygen, carbon dioxide, combustible 
gases or any bottled gas as an air source 
for the air tank.

  Such gases are capable of 

explosion and serious injury to persons.

3.  Obey the manual for the air compressor 

used to power this air tank.

 SAVE THESE INSTRUCTIONS.

Summary of Contents for CENTRAL PNEUMATIC 65594









Reviews: