SKU 90141
PAGE 4
2.
Smooth the edges of the punched out pieces with sand paper. Begin putting together
by using the drawing below as a guide. Use glue on the portions shown in “black”.
See arrows in Figure D.
3.
Use Scotch Tape
®
on the backside to hold round or non-flat pieces together.
4.
A rubber band can be used to hold assembled pieces until glue has dried. Clean the
edges or surfaces of the Wagon with a wet cloth to remove wet glue or unsightly
smudges.
5.
Rod “A” passes through Wheels (#23, #24, #26 & #4) front and rear of wagon.
6.
When assembly is completed, you can finish the Wagon with paint, colored
markers or crayons using your creativity.
Figure C
#4
#4
#18
#23
#25
#25
#24
#23
#23
#26
#1
#16
#19
#17
#14
#2
#12
#11
#13
#15
#24
#26
#3
#6
#8
#7
#9
#5
#21
#22
“A”
Brass
Rod
