Page 2
SKU 97736
For technical questions, please call 1-800-444-3353.
sAVE THIs MANUAL
Keep this manual for the safety warnings
and precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the
product’s serial number in the back of the manual
near the end of this manual (or month and year of
purchase if product has no number). Keep this
manual and the receipt in a safe and dry place
for future reference.
IMPOrTANT sAFETy
INsTrUCTIONs
In this manual, on the labeling, and
all other information provided with
this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
DANGEr indicates a
hazardous situation
which, if not
avoided, will result in death or
serious injury.
WArNING indicates
a hazardous
situation which, if
not avoided, could result in
death or serious injury.
CAUTION, used with
the safety alert
symbol, indicates a
hazardous situation which, if not
avoided, could result in minor or
moderate injury.
NOTICE is used to
address practices
not related to
personal injury.
CAUTION, without
the safety alert
symbol, is used to
address practices not related to
personal injury.
rEAD AND UNDErsTAND ALL
INsTrUCTIONs
When using this product, safety
precautions should always be followed
including the following:
General safety
Do not use this product for other than its
1.
intended use. Inspect before use. Do
not use if parts are loose or damaged.
Maintain labels and nameplates on the
2.
product. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
This product is not a toy. Keep it out of
3.
reach of children when children are not
being closely supervised.
Make sure to install this product on a
4.
clean, dry, flat, level surface capable of
supporting the weight of the product and
its contents.
Wear ANSI-approved safety
5.
impact goggles and heavy-duty
work gloves when assembling this
product.
Do not exceed the total weight capacity
6.
of
(400 pounds)
. Also, make sure the
weight is distributed evenly on each
Bench. Be aware of dynamic loading.
Dropping or bouncing on bench may
briefly create excess load causing
product failure.
DANGEr
WArNING
CAUTION
Notice
CAUTION
