Page 2
SKU 97696
For technical questions, please call 1-800-444-3353.
saVe this manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual near
the assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and dry
place for future reference.
important saFetY
inFormation
in this manual, on the labeling,
and all other information
provided with this product:
general safety instructions
Stay alert, watch what you are doing
1.
and use common sense when using
the thermometer. Do not use it while
you are tired or under the influence
of drugs, alcohol or medication.
A
moment of inattention while operating
this product may result in serious
personal injury.
Maintain labels and nameplates
2.
on the thermometer. These carry
important safety information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.
This product is not a toy. Keep it out
3.
of reach of children.
The warnings, precautions, and
4.
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations that
may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.
Do not place or store in the sun or
5.
adjacent to a heat source.
saVe these
instructions.
speciFications
Battery Requirements
Two 1.5V AAA Batteries
(included)
Temperature Range
Measured
93.2°F ~ 111.2°F +/- 4°
34.0°C ~ 44°C +/- 2°
Accuracy Range
± 0.4°F from 96° - 107.6°F
± 0.2°C from 35.5° - 42°C
this product is FDa approved.
unpacking
When unpacking, check to make
sure that the item is intact and undamaged.
If any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
operating instructions
read the entire important
saFetY inFormation section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Remove the Probe Cap.
1.
Push the “On/Recall” Button. A
2.
number of symbols will flash along
the top of the Display. The battery
symbol will display the charge level.
The Cover symbol will flash to remind
the operator to use a disposable cap,
and the ear symbol will appear.
Place a Disposable Probe Cover over
3.
the Probe and push it down until it
