Page 5
SKU 96138
for technical questions, please call 1-800-444-3353.
Bottom
Shelf (12)
Bottom
Shelf (12)
Bolt, Washer,
Nut (A)
Leg (5)
Figure 2
Cross Brace (10)
Attach each Bottom Shelf (12) to Left Cross Brace (9) and Right Cross Brace (10)
using Bolts, Washers and Nuts (A)-see Figure 2.
Secure each Cross Brace (9/10) with Bottom Shelf (12) to each Leg (11) using Nut,
Bolt and Washer (D).
Connect Top Brace (3/4) to each Leg (5) with Nut (D).
Attach Front Table Support (1) to front Legs (11) Nuts, Bolts and Washers (E).
Set Table (14) onto both Top Braces (3/4), Rear Table Support (2) and Front Table
Support (1).
Using the pre-drilled holes in the Table, attach the Table to the Rear Table Support
(2) and Front Table Support (1) using three Screws (G) up through each.
When you have finished assembling the Folding Work Bench, make certain that all
Legs rest securely on the floor. Make certain all hardware is tight and secure. Fold
up the Work Bench and use the locking latch to make certain it is securely collapsed
in the upright position.
inspection, MAintenAnce, And cleAning
before eAch use,
inspect the general condition of the Folding Work Bench.
Check for loose screws, misalignment or binding of moving parts, cracked or bro-
ken parts, and any other condition that may affect its safe operation.
do not use
damaged equipment.
9.
10.
11.
12.
13.
14.
15.
1.
