Page 3
SKU 95878
for technical questions, please call 1-800-444-3353.
use only accessories that are recommended by the manufacturer for your
8.
model. Accessories that may be suitable for one product may become hazardous
when used on another product.
maintain labels and nameplates on the marking gun.
9.
These carry important in-
formation. If unreadable or missing, contact Harbor Freight Tools for replacement.
assembly instructiOns
loading the labels
Pull up on the Label Clip (1) to lift it from the Price Marking Gun-see Figure 1.
1.
Pull the Base (26) out from the Price Marking Gun-see Figure 1.
2.
Press the Base Open Key to open the Base Plate (16)-see Figure 1.
3.
Place the Price Marking Gun on its side and set the Label Roll onto the Label Clip-
4.
see Figure 1.
Thread the Label Roll down between the rollers so that it comes out at the head of
5.
the Base Plate (16)-see Figure 1-and then snap the Base Plate (16) back into the
Price Marking Gun housing. Return the Label Clip to its “closed” position.
Make sure the Label Roll is still in place between the Base Plate (16) and Wheel
6.
(18) and then pull on the Labels until the holes in the Labels line up and engage
the knobs on the Wheel (18).
Continue to draw the Label Roll back towards the Handle as shown in Figure 2 (see
7.
next page). Feed the Label Roll out the rear while lining up the holes in the Label
Roll with those on the Wheel (18). Close the Base Plate Cover.
Base Plate (16)
Base (26)
Base Plate Open Key
Label Roll Clip (1)
Figure 1
Rev 08a
