![background image](http://html1.mh-extra.com/html/harbor-freight-tools/95329/95329_assembly-and-operating-instructions-manual_596779009.webp)
SKU 95329, 95331, 95332, 95333 and 95334
Page 9
1.
Assemble the Scissors sharpening
device as shown in the assembly
diagram at the bottom of this page.
2.
Mount the assembled device on a
standard bracket unit as in the
illustration at right.
3.
Mount your scissors (not included)
in the device as shown in the
illustration at right. The inner face
of the scissor blade should be
against the Backing Plate (2) and
the outer face of the blade should
be against the Scissors Support
(1). Please refer to the illustration.
4.
Adjust the device so the cutting edge of the scissor blade lightly rests on the
grinding wheel. Adjust the position of the scissor blade, so when moved
sideways, it will lightly move along the surface of the grinding wheel.
NOTE: The goal of sharpening scissors is to create a cutting edge at
approximately 90° to the flat inner surface of the scissor blade. The cutting
edge will be very slightly hollowed (4” radius) based in the diameter of the
grinding wheel.
5.
Turn on the grinding wheel. Slide the scissor blade across the grinding wheel
to sharpen its full length. Repeat as necessary. Turn the grinding wheel OFF
when finished.
6.
Repeat this process with the other blade.
7.
Shut off and disconnect from electric supply when finished.
Item 95331 Parts List
Item 95331 Device for Scissors: