background image

SKU 94862

        For technical questions, please call 1-800-444-3353

Page 2

Specifications

Item

Description

Power Requirement

12 VDC, 10 watts, 8 ohms

Horn Sizes

Bell mouth: 3” and 2-7/8”; Length: 5-3/4”, 6-
3/8” and 8-1/2”

Horn Material

Plastic, Red; Brass diaphragm

Sound

135 dB, high/low blast; Tones: high, medium,
low, and music

Air Source

Compressor, electric (supplied)

Wire

14-16 AWG auto wire

Weight

2.95 lbs.

Save This  Manual

You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram.  Keep
your invoice with this manual.  Write the invoice number on the inside of the front
cover.  Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.

Keep work area clean.  Cluttered areas invite injuries.

2.

Observe work area conditions.  Do not use machines or power tools in

damp or wet locations.  Don’t expose to rain.  Keep work area well lighted.
Do not use electrically powered tools in the presence of flammable gases or
liquids.

3.

Keep children away.  Children must never be allowed in the work area.  Do

not let them handle machines, tools, or extension cords.

4.

Use the right product for the job. There are certain applications for which

this product was designed. It will do the job better and more safely at the rate
for which it was intended. Do not modify this product and do not use for a
purpose for which it was not intended.

5.

Dress properly.  Do not wear loose clothing or jewelry as they can be caught

in moving parts.  Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working.  Wear restrictive hair covering to
contain long hair.

6.

Do not overreach.  Keep proper footing and balance at all times. Do not

reach over or across running machines.

Summary of Contents for 94862








Reviews: