SKU 94774
For technical questions please call 1-800-444-3353.
Page 5
Button to open
Canopy (4)
Canopy (4)
Battery Pack (10)
Figure 4-opening canopy for battery Pack
4. Open the Canopy (4) by sliding down the button located on the front of the Canopy (4)
and lifting the Canopy (4). Connect the Battery Pack (10) to the socket located inside
the Fuselage (3) - see Figure 4. Once the Battery Pack (10) is in place, close the
Canopy.
tail Assembly
Figure 4a
Figure 5a
Figure 6a
1. Remove all the protection paper at the bottom of the Vertical Fin/Rudder (6a) and
Level Stabilizer (6b). Attach Vertical Fin to Level Stabilizer.
Remove the protection paper in the tail of the Fuselage (3) as shown in Figure 4a.
2.
Insert Wing Assembly (6) to Fuselage (3). Make sure the position is correct and it is
3.
tightened by the protection paper.
Connect the Pushrods (8) to the Rudder (6a) and Level Stabilizer/Elevator (6b) as
4.
shown in Figure 5a.
Adjust the clips to level both the Rudder (6a) and Elevator (6b) as shown in Figure 6a.
5.
charging the battery Pack
Plug the Charger (11) into a 120 V~ electrical outlet. Place the battery on a fireproof
1.
surface. Plug the Battery Pack (10) into the Charger (11).
