SKU 91735 For technical questions, please call 1-800-444-3353. Page
3
Assembly
Your Toy Box will require complete assembly. It is important that you read the entire manual to
become familiar with the product BEFORE you use the Toy Box. Before assembling the Toy Box be
sure that you have all parts described in the Parts List and Assembly Diagram located on the last
pages of this manual.
1.
Slide the Side Wall (1) into the slot in the corner brace of the Main Wall (2). Make
certain it is square with the Main Wall (2). Secure it in place by screwing a Wood Screw (3)
into each pre-drilled hole in the top, middle and bottom of the corner brace of the Main
Wall (2). Repeat for the second Side Wall (1). Make certain to leave one Main Wall (2)
unattached.
Wood Screw (3)
Side Wall (1)
Corner Brace
Figure 1
Main Wall (2)
2.
Turn the Box so it sits on the Main Wall and slide the Floor (4) down into the grooves on the
bottom of the Side Walls (1). Make certain that the Floor (4) slides all the way down into the
groove in the Main Wall (2)-see Figure 2.
Floor (4)
Side Wall (1)
Main Wall (2)
Figure 2
3.
Slide the remaining Main Wall (2) onto the Side Walls (1). Make certain that the bottom
Floor (4) slides into the bottom groove on the Main Wall (2). Make certain that the Main
Wall (2) is square and that each piece is securely fitted into the slots. Tighten it in place by
screwing a Wood Screw (3) into each pre-drilled hole in the top, middle and bottom of the
corner brace of the Main Wall (2).
4.
Place the Top (5) onto the assembled Toy Box.
