Harbor Freight Tools 91311 Assembly & Operating Instructions Download Page 2

SKU 91311

For technical questions, please call 1-800-444-3353.

Page 2

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1.

Keep work area clean

.  Cluttered areas invite injuries.

2.

Observe work area conditions

.  Keep work area well lit.  Keep work area uncluttered and free

of debris.  Cluttered areas invite injury.

3.    

Check for damaged parts

.  Before using any product, any part that appears damaged should

be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.

4.

Replacement parts and accessories

.  When servicing, use only identical replacement parts.

Use of any other parts will void the warranty.

5.

Always check hardware and assembled parts after assembling.  

All connections should be

tight and hardware tightened.

6.

Children should only be allowed to play with the Bi-Plane when closely supervised by a

responsible adult.

7.

Store idle equipment.  

When not in use always lock up the Bi-Plane and keep it out of the

reach of children.

8.

Dress properly

.  Wear restrictive hair covering to contain long hair.

9.

Use eye protection

.  Always wear ANSI approved impact safety goggles when assembling

this product.

10.

Maintain products with care

.  Keep the Bi-Plane in a dry location.  Do not expose it to

prolonged moisture.

T

HANK YOU for choosing a 

HARBOR FREIGHT TOOLS 

product.  For future reference, please

complete the owner’s record below:

Model______________

Serial No._____________

Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS.  It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.

Technical Specifications

Upper Wing Span:

15-7/8" L x 2-1/2" W

Bottom Wing Span:

14-3/8" L x 2-5/8" W

Fuselage:

12-3/8" L x 1-5/8" W x 3" H

Horizontal Tail:

6-3/4" L x 2-5/8" W

Tail Height:

3-1/4" H x 2-3/4" W

Also included:

(1) spare propeller, (1) battery charger and glue.

The Bi-Plane charger requires 4 “AA” size batteries.  Not included.

Summary of Contents for 91311







Reviews: