background image

Page 2

SKU 90750

Specifications

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram.  Keep your invoice with this
manual.  Write the invoice number on the inside of the front cover.  Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1.

Keep work area clean.  Cluttered areas invite injuries.

2.

Observe work area conditions.  Don’t expose to rain.

3.

Keep children away.    Do not let them handle the Telescope without adult
supervision.

4.

Store idle equipment.  When not in use, products must be stored in a dry location to
inhibit rust.  Always lock up products and keep out of reach of children.

5.

Use the right product for the job. Do not attempt to force a small product to do the
work of a larger industrial product. There are certain applications for which this
product was designed.  Do not modify this product and do not use this product for a
purpose for which it was not intended.

6.

Do not overreach.  Keep proper footing and balance at all times.

7.

Maintain products with care.  Keep products clean for better and safer
performance. Follow instructions for changing accessories. The Telescope must be
kept clean, dry, and free from oil and grease at all times.

8.

Stay alert.  Watch what you are doing, use common sense. Do not operate any
product when you are tired.

Dimensions

28-1/8” L x  2-1/2” OD

Tripod Base Dimensions

31” x 31” X 31”

Maximum Height

51-1/8” Tall (Scope parallel to the floor)

Spotting Scope

3X

Lens Aperture

5-3/16” (approx.)

Eyepiece Size

1” Diameter

Focus Adjustment

Rack and Pinion

Weight

2.20 Lbs.

Features: Lens Cap and two Eyepieces ( 1@ 50X and 1 @ 100 X)

NOTICE:  This  is  an  astronomical  telescope.   The  image  as viewed is  inverted.  It  is  not  meant  for  use as  a
spotting scope.

Summary of Contents for 90750






Reviews: