UNPACKING
When unpacking, check to make sure all the parts shown on the
Parts List
(page 9)
are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
NOTE:
For additional references to the parts listed in the following pages, refer to the
Assembly Diagram (page 9). Always wear gloves when handling the fiberglass
poles.
1.
Spread out the Dome Tent on a smooth, level area with the doorway facing the
desired direction.
(See Figure A.)
.
2.
Connect the Shock-Corded Tent Pole sections (part #1) making sure that the rods
fit securely in canopy sleeves, and insert the two Poles completely and evenly
through the diagonal
Pole Slots
on the Tent Body (part #3).
CAUTION! Wear
ANSI approved safety impact goggles when assembling the Shock-Corded
Tent Poles, as the Poles are under considerable tension and may suddenly
whip back toward the face and/or body.
(See Figure A.)
SKU 90567
PAGE 4
SHOCK-CORDED
TENT POLE
(#1)
SHOCK-CORDED
TENT POLE
(#1)
POLE SLOT
POLE SLOT
POLE SLOT
POLE SLOT
TIE-STRIP
TENT DOORWAY
FIGURE A
3.
Secure the two Shock-Corded Tent Pole sections (part #1) to the Tent Body
(part #3), using the
Tie-Strip
located at the top of the Dome Tent.
(See Figure A.)
90567.p65
9/26/03, 9:54 AM
4
