Harbor Freight Tools 68752 Instructions And Precautions Download Page 2

Page 2

For technical questions, please call 1‑800‑444‑3353.

SKU 68752

This device complies with part 15 of the 

FCC Rules. Operation is subject to the 

following two conditions: (1) This device 

may not cause harmful interference, 

and (2) this device must accept any 

interference received, including interference 

that may cause undesired operation.

ImpoRtant saFetY 

InFoRmatIon

In this manual, on the labeling, 

and all other information 

provided with this product: 

This is the safety alert symbol.  It 

is used to alert you to potential 

personal injury hazards.  Obey 

all safety messages that follow 

this symbol to avoid possible injury or death.

dangeR

dangeR indicates a hazardous 

situation which, if not avoided, will 

result in death or serious injury.

WaRnIng

WaRnIng indicates a hazardous 

situation which, if not avoided, could 

result in death or serious injury.

CautIon

CautIon, used with the safety 

alert symbol, indicates a hazardous 

situation which, if not avoided, could 

result in minor or moderate injury.

Notice

notICe is used to address practices 

not related to personal injury.

CautIon

CautIon, without the safety alert 

symbol, is used to address practices 

not related to personal injury.

 

 

WaRnIng Read all safety 

warnings and instructions. 

Failure to follow the warnings 

and instructions may result in 

serious injury.  

save all warnings and instructions  

for future reference.

1.  Intended for ages 14 years and 

older. Keep out of reach of children 

younger than 14 years old.

2.  Intended for indoor use with 

direct line of sight from infrared 

controller to Helicopter.

3.  Do not touch the moving rotors.
4.  Do not fly towards people or animals. 

Keep area clear of bystanders.

5.  Do not expose to rain or wet conditions.   
6.  Position batteries in proper polarity and 

do not install batteries of different types, 

charge levels, or capacities together.

7.  Inspect before every use; do not 

use if parts are loose or damaged.

8.  Store idle equipment.  When not 

in use, store in a dry location to 

decrease exposure to moisture. Pack 

carefully so rotors are protected 

from being bent or broken. 

9.  The warnings, precautions, and 

instructions discussed in this instruction 

manual cannot cover all possible 

conditions and situations that may 

occur.  It must be understood by the 

operator that common sense and 

caution are factors which cannot 

be built into this product, but must 

be supplied by the operator.

saVe tHese 

InstRuCtIons

Summary of Contents for 68752









Reviews: