background image

Page 3

For technical questions, please call 1-888-866-5797.

Item 67378 
        

Sa

FE

ty

Op

E

ra

ti

O

n

Maint

E

nanc

E

SE

t

U

p

5. 

consult local regulations before using 
detector, digging, or taking any findings.  

Obtain property owner’s permission 
before detecting on their property. 

6. 

Only use and store in normal temperature 
environments. 

Extremes in temperature can 

shorten effectiveness of electronic devices 
and melt or damage plastic parts.

7. 

avoid electrical shock. 

Any metal detector may 

discover underground power lines, explosives 
or other items which when struck could cause 
personal injury.  Do not use this product in areas 
where there might be underground electric lines 
or pipes buried at shallow depths.  Never search 
in military zones where bombs or other explosives 
may be buried.  Avoid striking any line known or 
suspected to be carrying electric power.  Do not 
search any pipeline, particularly if it could contain 
a flammable gas or liquid.  In areas of uncertain 
conditions, use reasonable caution before using 
the Tool.  If there is any question about a condition 
being safe of unsafe, do not operate the Tool.

8. 

Keep the Metal Detector away from any lights, 
tVs, computers, and mobile telephones. 

 These 

can all cause electromagnetic interference.

9. 

Only the Search coil and black section of the 
Lower Leg are waterproof. 

Do not immerse the 

unit beyond the black section of the Lower Leg.

10. 

Keep the tool clean.  

Wipe the housing after 

each use.  The search coil is washable and can 
be fully submerged.  Never submerge the control 
housing.  Protect the control housing from rain, 
blowing surf and heavy mist.  Disassemble the 
Leg and wipe it clean after use in sandy areas.

11. 

Use the right tool for the job

.  There are certain 

applications for which this tool was designed. 
Do not modify this tool and do not use this tool 
for a purpose for which it was not intended.

12. 

this product is not a toy. 

 Keep 

it out of reach of children.

13. 

people with pacemakers should consult their 
physician(s) before use. 

 Electromagnetic fields 

in close proximity to heart pacemaker could cause 
pacemaker interference or pacemaker failure.  In 
addition, people with pacemakers should: 
• Avoid operating alone. 
• Properly maintain and inspect 
to avoid electrical shock.

14.  The warnings, precautions, and instructions 

discussed in this instruction manual cannot 
cover all possible conditions and situations 
that may occur.  It must be understood by the 
operator that common sense and caution are 
factors which cannot be built into this product, 
but must be supplied by the operator.

 

SaVE tHESE inStrUctiOnS.

SpEciFicatiOnS

Electrical Input

6 AA Batteries (not included)

Earphone Jack

3.5 mm mini-jack Socket

Functions

Sensitivity Adjuster; Metal-
Type Discriminator; All-Metal 
Indicator; Tone Adjuster; 
Volume Control; Target Locator; 
Low Battery Indicator; Auto 
Ground Balance; Mode Selector

Summary of Contents for 67378













Reviews: