SKU 66197
For technical questions, please call 1-800-444-3353.
Page 4
ASSEMBLY INStrUCtIONS
read the ENtIrE IMpOrtANt
SAFEtY INFOrMAtION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Insert the Horizontal Support Beam
1.
(4) through the opening in the Center
Leg (3).
(See Figure A.)
Align the end of the Horizontal Sup-
2.
port Beam (4) with the two pre-drilled
holes
in the End Leg (2).
NOTE: Make sure the
indented
area
of the End Leg is facing inward.
Secure the End Leg to the Horizon-
3.
tal Support Beam, using two Insert
Screws (8). Then cover the two
Screws by inserting two Insert Caps
(9) in the pre-drilled holes. Repeat
this procedure for the remaining End
Leg.
(See Figure A.)
Attach the Bench Top (1) to the Cen-
4.
ter Leg (3) and the two End Legs (2)
using six Bolts (5), twelve Washers
(6), and six Nuts (7).
(See Figure A.)
Insert two Leg Caps (10) into the bot-
5.
toms of the Center Leg (3) and the
two End Legs (2).
(See Figure A.)
BENCH tOp
(1)
CENtEr LEg
(3)
ENd LEg
(2)
ENd LEg
(2)
HOrIZONtAL
SUppOrt
BEAM
(4)
LEg CAp
(10)
BOLtS (5)
WASHErS (6)
NUtS (7)
INSErt
SCrEWS
(8)
INSErt
CApS
(9)
BOLtS (5)
WASHErS (6)
NUtS (7)
INSErt
SCrEWS
(8)
INSErt
CApS
(9)
FIgUrE A
