Page 3
For technical questions, please call 1-888-866-5797.
Item 62774
Operation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
General Operating Instructions
Note:
Do not place the Spotting Scope in water
or use in the rain. The Scope is not waterproof.
1. Remove the protective Lens Cap.
2. Look into the Eyepiece on the Spotting Scope
and rotate the Focusing Knob in either direction
to focus on the object being viewed. Rotate
Knob until a clear image is obtained.
3. To zoom in or out, rotate the Zoom Ring
to the desired magnification setting. Use
the Focusing Knob to refocus.
4. If strong sunshine is affecting visibility,
extend the Sunshade by pulling it out.
WARNING!
RISK OF SERIOUS INJURY AND
BLINDNESS. DO NOT LOOK DIRECTLY AT OR
NEAR THE SUN WITH THE SPOTTING SCOPE.
5. If the Spotting Scope is moved from a cold
environment into a warmer one, condensation
may form on the lens. This is a normal reaction
which will disappear in about one hour.
Mounting Spotting Scope on Tripod
1. Pull out the Tripod legs and place the
Tripod on a level, stable surface.
2. Place the Mounting Bracket that is attached to
the Spotting Scope onto the Tripod Head.
3. Thread the Screw Knob on the Tripod Head into the
Mounting Bracket attached to the Scope and firmly
tighten to secure the Spotting Scope in place.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning and Maintenance
1.
BEFORE EACH USE,
inspect the general
condition of the Spotting Scope. Check for:
• loose hardwar
• misalignment or binding of moving parts
• cracked or broken parts
• any other condition that may
affect its safe operation.
2.
AFTER USE,
replace the Lens Cap and place
the Spotting Scope in its case. Store indoors in a
moisture-free environment out of children’s reach.
3. To clean the lenses, use a soft, lint-free cloth
dampened with a small amount of lens cleaning
solution. Do not pour the lens cleaning solution
directly on the lens. Do not use excessive pressure
to clean the lenses or scratching may occur.
Record Serial Number Here:
Note:
If product has no serial number, record month and year of purchase instead.
