Page 4
For technical questions, please call 1-888-866-5797.
Item 57990
Set Up
Unpacking
1. Carefully slide the cardboard support
containing the Boat out of the packaging.
2. Remove the Remote.
3. Remove the Boat from the cardboard. If
any part does not slide out easily, stop and
clear the obstruction before proceeding.
Battery Charging and Installation
1. Remove Battery from package.
2. Connect Battery to USB Cable,
then plug Cable into a USB power
source capable of 2A output.
Battery
USB
Cable
3. While Battery is charging, red LED
light on charger is on. When fully
charged, LED light turns off. Charging
takes approximately 2 hours.
4. When charging is complete, disconnect
Battery from USB Cable and power source.
5. To install Battery, turn and
open Deck Cover latch.
Latch
6. Place Battery into compartment within Deck
housing, and secure it underneath both clips.
Battery
Compartment
Battery
Clips
7. Connect battery wire to housing wire.
Wiring Connection
Remote Control
1. Make sure Remote Control is turned OFF.
2. Push open the battery cover on
the back of the Remote.
3. Insert four AA batteries (not included)
into battery compartment,
following indicated polarity.
4. Push battery cover back into place and
make sure it is securely closed.
