Page 2
For technical questions, please call 1-888-866-5797.
Item 56513
Specifications
Batteries Required
4x “AA” Batteries (for Car)
2x “AA” Batteries (for Remote)
Frequency
2.4 GHz
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Important Safety Information
1.
Changes or modifications not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
2.
Follow basic safety precautions to
reduce the risk of personal injury and/
or damage to the product during use.
3.
Do not allow children younger than
age 6 to use this Car.
Children should
not operate without adult supervision.
4.
Keep out of reach of children younger
than 3.
Contains small parts that
may present a choking hazard.
5.
Keep spectators and pets away.
Spectators
should only watch from a safe distance.
6.
Do not mix old and new batteries.
Do
not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
Position batteries in proper polarity. Do
not use swollen or leaking batteries.
7.
Do not open the Car’s housing or
modify its design.
Doing so may cause
damage and/or make it dangerous.
8.
Do not use if parts are loose
or damaged.
If the toy has been
damaged, immediately stop using it.
9.
Only use outside or in large,
enclosed area.
Do not drive near open
flames, pets, or delicate furniture.
10.
If you lose control of the Car,
release the switches.
11. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by
the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
12. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Assembly
Unpacking
1. Carefully slide the cardboard
support containing the Amphibious
Car out of the packaging.
2. Remove the Remote.
3. Remove the Amphibious Car from
the cardboard. If any part does not
slide out easily, stop and clear the
obstruction before proceeding.
