Page 6
For technical questions, please call 1-888-866-5797.
Item 56167
Inspection, Maintenance, and Cleaning
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
Do not use damaged equipment. If abnormal noise, vibration, or
leaking air occurs, have the problem corrected before further use.
Follow all guidelines regarding chemicals sprayed, including MSDS instructions and EPA regulations.
Release pressure in Bottle by pulling up on the Pump Handle and slowly twisting Lid
before fully removing it. Contents are under pressure and may spurt forcefully.
1.
BEFORE EACH USE
, inspect the general
condition of the Sprayer. Check for:
• loose hardware
• misalignment or binding of moving parts
• cracked or broken parts
• any other condition that may
affect its safe operation
2.
AFTER EVERY USE
, clean the Sprayer:
a. Flush with water.
b. Clean Nozzle and Filter.
c. Rinse with water and allow to air-dry.
3.
PERIODICALLY
, lubricate all moving parts of
the pump assembly with petroleum jelly.
4. Store the Sprayer in a safe, dry, clean location
out of reach of children and out of sunlight.
Troubleshooting
Problem
Possible Causes
Likely Solutions
Unit does not spray
1. Inlet Hose detached.
2. Not enough liquid in Bottle.
3. Lid is loose.
4. Nozzle is closed.
5. Sprayer not pressurized.
6. Nozzle and/or Filter clogged.
1. Reattach Inlet Hose.
2. Add liquid to Bottle.
3. Tighten Lid.
4. Turn Nozzle to open and adjust spray.
5. Press and pull Pump Handle
to pressurize Sprayer.
6. Disassemble, clean, then reassemble
Nozzle and/or Filter.
Spray pattern is
undesirable
1. Nozzle needs adjustment.
2. Spray fluid contains
particles or sand.
3. Nozzle and/or Filter clogged.
1. Adjust Nozzle.
2. Disassemble, clean, then reassemble
Nozzle and/or Filter. Empty, clean, then
refill bottle with properly strained fluid.
3. Disassemble, clean, then reassemble
Nozzle and/or Filter.
Follow all safety precautions whenever diagnosing or servicing the Sprayer.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note:
Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
