background image

SKU 55477       

 For technical questions please call 1-800-444-3353

         Page 3

WARNING:  The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may oc-
cur. It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.

WARNING: Do not look directly into the sun or any other strong light source
through this telescope unless you have the Sun Filter attached to the eyepiece.
Serious eye injury may result.

Unpacking

When unpacking, check to make sure that all parts shown below are included, and
that the product is intact and undamaged. If any parts are missing or broken,
please call Harbor Freight Tools at the number on the cover of this manual.

Component Parts of your Telescope

Telescope Assembly

Tripod Base

Tripod Supports

Large Lens Cover

Locking Knobs

Telescope Assembly

Eyepieces

Small Lens Cover

Sun Lens

7.

Check for damaged parts.  Before using any tool or instrument, any part that

appears damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding of
moving parts; any broken parts or mounting fixtures; and any other condition
that may affect proper operation. Any part that is damaged should be properly
repaired or replaced by a qualified technician.

Summary of Contents for 55477










Reviews: