Work Area
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR
WORK AREA IS:
Free of damp, wet or rainy conditions.
Free of children (never let them handle tools or machinery).
Clean and uncluttered.
Assembly
Your Bird Bath comes unassembled. Please refer to the Parts List on this page and the Assembly Diagram on
page 4 prior to assembly. It is important that your read the entire manual to become familiar with the unit
BEFORE you use it.
Before assembling the Bird Bath, lay out all the parts on a work space or clear area of the floor. Be sure that
you have all parts described in the Parts List.
Step 1)
The Girl/Umbrella (part A) has a threaded screw at the bottom which is to be inserted through
the Tray (part E), through the Tray Supporter (part F), through the Bowl (part B) and screwed
into the Column (part C). Secure the Girl/Umbrella and the rest of the assembly in place by
sliding on a washer (part G) and then by screwing on the Nut (part G) until tight and secure.
Step 2)
The Bowl (part B) has three (3) screws (part H) which are inserted downward into the
corresponding holes in the Column (part C). Slide a Washer onto the screw and secure it in
place with the nut. Repeat for all three (3) screws.
Step 3)
The Column (part C) has three (3) large threaded screws (part I) facing out from the bottom.
Insert these downward through the holes in the Base Pad (part D). From the bottom, secure
the Column and assemble to the Base Pad by screwing on a washer and then a nut onto each
of the three (3) screws.
Step 4)
Check to make certain that all hardware is securely assembled.
Step 5)
Set your Bird Bath up on a firm and level spot in your yard. Fill up the bowl with water.
Unpacking
UNPACK AND CHECK CONTENTS
When unpacking your Cast Aluminum Bird Bath, check to make sure the following parts are included. If any
parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.
Parts List - #41637
Part #
Description
Quantity
Part #
Description
Quantity
A
Girl with Umbrella
1
F
Tray Supporter
1
B
Bowl
1
H
Screw 6x35, Nut and Washer - 6 mm
3
C
Column
1
I
Screw 8x35, Nut and Washer - 8 mm
3
D
Base Pad
1
J
Bolt 8x20 and Washer - 8mm
2
E
Tray
1
K
Junction
1
L
Pump
1
M
Pump shelf
1
#41637
Page 3
