SKU 03514/92927
For technical questions, please call 1-800-444-3353. Page 7
FIGURE C
ASSEMBLY INSTRUCTIONS
CAUTION: THIS PRODUCT SHOULD BE ASSEMBLED ONLY BY AN ADULT.
To Connect The Front End Chassis To The Frame:
1.
With assistance, raise and hold the front end of the Motorcycle off the ground.
2.
Align the two mounting holes in the Front End Chassis (11) with the mounting hole
in the Frame (12). Then secure the Front End Chas-
sis to the Frame, using one Bolt (13) and one Nut
(14). (See Figure D, next page.)
3.
While making certain that the Throttle Pedal (2) is
not depressed, remove the 2 screws holding the
battery cover on. Move the cover slightly aside.
The negative terminal is left disconnected to pre-
vent the unit from operating during shipment.
Reconnect the negative battery wire, shown right.
4.
Then, connect the Battery Supply Wire (15) to the
Wiring Harness (16). (See Figure D.)
TAIL LIGHT (4)
SEAT (5)
HANDLE BAR (6)
HEAD
LIGHT
(3)
WHEEL
(8)
THROTTLE PEDAL (2)
SAFETY
WHEEL
(7)
FORWARD SWITCH
REVERSE SWITCH
HORN BUTTON
PANEL
(1)
INSTRUMENT
