Harbor Freight Tools 3343 Assembly And Operating Instructions Manual Download Page 2

Page 2

SKU 03343

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram.  Keep your invoice with this
manual.  Write the invoice number on the inside of the front cover.  Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.

Keep work area clean

.  Cluttered areas invite injuries.

2.

Observe work area conditions

.  Do not use the timing light in damp or wet locations.

Don’t expose to rain.  Keep work area well lighted.  Do not use electrically powered
tools in the presence of flammable gases or liquids.

3.

Keep children away

.  Children must never be allowed in the work area.  Do not let

them handle the timing light.

4.

Store idle equipment

.  When not in use, tools must be stored in a dry location to

inhibit rust.  Always lock up tools and keep out of reach of children.

5.      

Use the right tool for the job

.   Do not attempt to force a small tool or

         attachment to do the work of a larger industrial tool.  There are certain
         applications for which this tool was designed.  It will do the job better
         and more safely at the rate for which it was intended.  Do not modify this
         tool and do not use this tool for a purpose for which it was not intended.

6.

Dress properly

.  Do not wear loose clothing or jewelry as they can be caught in

moving parts.  Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working.  Wear restrictive hair covering to contain long hair.

7.

Use eye and ear protection

.  Always wear ANSI approved impact safety goggles.

8.

Do not overreach

.  Keep proper footing and balance at all times. Do not reach over

or across running machines.

Overall Dimensions

7.5” L x 2” Dia. and a 3.5” Handle Grip

Lead Length

4 Feet

Features:  Xenon bulb, Clamp on inductive pick up, automatic reverse polarity, overload
protection, trigger activated pistol grip

Specifications

WARNING!!

 Do not work in a closed garage.  A vehicle’s engine while running

produces carbon monoxide.  Work in a well ventilated area to avoid carbon monoxide
poisoning.  Carbon Monoxide is an odorless, colorless gas that can cause serious
injury or death if inhaled.

Summary of Contents for 3343








Reviews: