13
FINAL INSTALLATION
3
.
Attach the blades (L) to the blade arms (N) using the
blade screws (BB), blade washers (CC) and screw
caps (LL).
Hardware Used
BB
Blade Screw
x 9
Blade Washer
x 9
Screw Cap
x 9
4. Install the blade arm (N) to the topside of the motor
assembly (G) with motor screws (O) previously
removed (Step 6, page 8). Tighten with Phillips
screwdriver (not included).
5. Remove one of the four adapter plate screws
(R) preassembled to the adapter plate (Q) on the
underside of the motor assembly (G) and loosen
the other three. Align the holes of the fitter plate (H)
with the loosened adapter plate screws (R) and turn
clockwise. Replace the previously removed adapter
plate screw (R), then tighten all screws.
L
N
4
3
BB
CC
LL
O
N
R
Q
H
G
CC
LL
5
G
