9
Lowes.com/harborbreeze
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1. Remove the downrod pin (DD) and downrod clip
(EE) from the downrod (A). Then partially loosen the
motor-housing set screws (HH) in the yoke at the top
of the motor housing (E).
Helpful Hintt
Downrod style mounting is best suited
for ceilings 8 ft. (2.44 m) high or higher. For taller
ceilings you may want to use a longer downrod
(not included) than the one provided. Angle style
mounting is best suited for angled or vaulted ceilings.
A longer downrod is sometimes necessary to ensure
proper blade clearance.
Hardware Used
DD
Downrod Pin
DD
x 1
EE
Downrod Clip
EE
x 1
HH
Motor Housing
Set Screw
HH
x 2
E
A
EE
DD
A
1
HH
2. Insert the downrod (A) through the canopy (B),
canopy cover (J), and yoke cover (D). Ensure that
the canopy cover (J) is turned with the shiny side
toward the motor housing (E). Thread the wires from
the motor housing (E) up through the downrod (A).
D
B
J
A
2
E
