12
How to Assemble Your Light Kit
2.
Remove one of the three screws in the light plate
assembly and retain for later. Slightly loosen the
remaining two screws. (Figure 2)
3.
Connect the 2 pin connectors from the LED
assembly to the 2 pin connectors from motor
assembly. (Figure 3 )
5.
Securely attach glass by twisting clockwise onto
the light plate assembly. Don’t overtighten or force it.
(Figure 5)
Motor Assembly
LED Assembly
LED Assembly
Motor
Assembly
Figure 1
Light Plate
Assembly
Light Plate
Assembly
Light Plate
Assembly
1.
Remove one of the three screws inside the
adaptor plate at the bottom of the motor assembly.
Slightly loosen the remaining two screws. Assemble
the light plate assembly to the adaptor plate of the
motor assembly using the two keyslots in the light
plate assembly. Replace the third screw and secure
all three screws. (Figure 1)
Figure 3
Light Plate
Assembly
Figure 5
Glass
Figure 2
Figure 4
4.
Assemble the LED assembly to the light plate
assembly using the two key slots and replace the
third screw and securely tighten all three screws.
(Figure 4 )
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
CAUTION
