16
CARE AND MAINTENANCE
At least twice each year, lower motor housing (A) to check motor assembly (C), and then tighten all
screws on fan. Clean motor housing (A) with only a soft brush or lint-free cloth to avoid scratching the
finish. Clean blades (G) with a lint-free cloth. You may occasionally apply a light coat of furniture polish
to wood blades for added protection.
Important:
Shut off main power supply before beginning any maintenance. Do not use water or a
damp cloth to clean the ceiling fan.
TROUBLESHOOTING
If you have any questions regarding the product please call customer service at
1-800-527-1292
,
8:30 a.m. - 5 p.m., CST, Monday - Friday.
Warning
: Before beginning work, shut off the power supply to avoid electrical shock.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Fan does not move.
1. Reverse switch not engaged.
2. Power is off or fuse is blown.
3. Faulty wire connection.
1. Push switch firmly either to the
up or to the down.
2. Turn power on or check fuse.
3. Turn power off. Loosen motor
housing (A) and check all
connections.
Noisy operation.
1. Blades (G) are loose.
2. Cracked blade (G).
3. Full range dimmer switch.
4. Fan is new.
5. Motor housing (A) is loose.
1. Tighten all blade screws (AA).
2. Replace blade (G).
3. Replace with an approved
speed control device.
4. Allow fan a “break in” period of a
few days, especially when
running the fan at Medium and
High speeds.
5. Turn power off. Carefully loosen
motor housing (A) and verify
that mounting bracket (B) is
secure according to instructions
on page 10.
Excessive wobbling.
1. Blades (G) are loose.
2. Blade arms (J) incorrectly attached.
3. Unbalanced blades (G).
4. Fan not securely mounted.
1. Tighten all blade screws (AA).
2. Re-install blade arms (J).
3. Switch one blade (G) with a
blade (G) from the opposite
side.
4. Turn power off. Carefully loosen
motor housing (A) and verify
that mounting bracket (B) is
secure.
Fan operates but
light fails.
1. Bulb(s) not installed correctly.
2. Wires in outlet box not wired properly.
3. Wall switch to fan is off.
1. Re-install bulb(s).
2. Check wires in outlet box, and if
necessary, re-wire according to
instructions on pages 8 and 9.
3. Make sure that wall switch to fan
is on.
harborbreezeoutlet.com
harborbreezeoutlet.com
