11
FINAL INSTALLATION
D
F
Carefully arrange wires inside switch housing (F).
Align hole in edge of LED light kit (D) with loosened
switch housing screw (K) in switch housing (F).
Re-insert the other two switch housing screws (K)
previously removed. Tighten all three switch
housing screws (K) securely.
7.
3
7
K
Align slots on shade (G) with protrusions on the
inside of the switch housing (F). Turn shade (G) to
the right (clockwise) until it no longer turns.
NOTE:
Pull down gently on the shade (G) to make
sure that it is secured completely.
8.
3
8
G
K
K
B
Attach pull chain extensions (CC) or custom pull
chain extensions (not included) to fan and light pull
chains.
9.
9
CC
CC
Pull Chain Extension
x 2
Hardware Used
CC
F
