7
ASSEMBLY INSTRUCTIONS
1. Turn off circuit breakers and wall switch to the fan supply
line leads. [Fig. 1]
2. Determine mounting methods to use. [Fig. 2]
3. Check to make sure blades (H) will be at least 30 in.
from any obstructions. Check downrod (A) length to
HQVXUDUHDWOHDVWIWDERYHWKHÀRRU
[Fig. 3]
Important
: If using the angle mount, check to make sure
the ceiling angle in not steeper than 25°
DANGER
: Failure to disconnect power supply prior
to installation may result in serious injury or death.
1
2
3
