9
Lowes.com/harborbreeze
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1. Remove the downrod pin (EE) and downrod clip
(DD) from the downrod (A). Then partially loosen the
downrod set screws (FF) in the yoke at the top of the
motor assembly (E).
Help Hint:
Standard mounting is best suited for
ceilings 8 ft. or higher. For taller ceilings you may
want to use a longer downrod (not included). Angle-
style mounting is best suited for angled or vaulted
ceilings. A longer downrod is sometimes necessary
to ensure proper blade clearance.
Hardware Used
DD
Downrod Clip
x 1
EE
Downrod Pin
x 1
FF
Downrod Set
Screw
x 2
E
A
DD
EE
FF
A
1
2. Insert the downrod (A) through the canopy (B) and
yoke cover (D). Thread the wires from the motor
assembly (E) through the downrod (A).
A
B
D
E
2
