Lowes.com/harborbreeze
10
INITIAL INSTALLATION
4. Remove the two mounting bracket screws (HH) from the
round holes of canopy (B). Set aside for later use.
Detach mounting bracket (C) from canopy (B).
Hardware Used
5. Feed black,
blue and
white wires from the plug on the
mounting
bracket (C) up through the hole in the
top.
6. Remove and
discard the three rubber stoppers and
the
five
plastic spacers
from the
underside
of
the
motor assembly
(E).
For
Standard or Angle Mounting Instructions
, continue to page 9. For
Closemount
Instructions
, proceed to page 12.
WARNING:
To
reduce
the
risk
of
fire,
electrical
shock, or
personal
injury, wire connectors provided with this fan are designed to accept only
one 12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12
4
HH
Mounting
Bracket Screw
x 2
Summary of Contents for 40101
