background image

PREPARATION

SAFETY INFORMATION

HARDWARE CONTENTS

PACKAGE CONTENTS

WALL CONTROL AND REMOTE

ITEM #0745365

MODEL #41179

Serial Number

Purchase Date

ATTACH YOUR RECEIPT HERE

Harbor Breeze

®

 is a registered trademark 

of LF, LLC. All rights reserved.

Remote

Qty. 1

Wall Bracket

Qty. 1

Battery

Qty. 2

Receiver

Qty. 1

Push-on

Connector

Qty. 2

Wall Control 

Qty. 1

Decor 

Plate

Qty. 1

Standard 

Plate

Qty. 1

Wire Connector

Qty. 3

Plate Screw

Qty. 2

A

B

C

D

E

F

G

AA

BB

H

Read instructions completely before installing the remote.

 WARNING: 

If the color of the household supply wires is different than what is referred to in the instructions below, a 

professional electrician should determine proper wiring.

CAUTION:

• 

Do not install in damp locations. For indoor use only.

• 

Do not use with fans that have integrated remote controls.

• 

Be sure the outlet box is properly grounded or that a green or bare (ground) wire is present.

• 

This unit is intended to control a ceiling fan with electrical source of AC 110/120V, 60Hz.

• 

To reduce the risk of fire or electric shock, do NOT use a full-range dimmer switch to control the fan speed.

• 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the 

receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an 

outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/

TV technician for help. Any changes or modifications not expressly approved by the grantee of this device could void the 

user’s authority to operate the equipment. FCC ID: KUJCE 10409, KUJCE 10003

Questions? 

Call our customer service department 

at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - 

Thursday, 8 a.m. - 5 p.m., EST, Friday.

Mounting Screw

Qty. 2

CC

Tools required for assembly (not encluded): Electrical Tape and Phillips Screwdriver

Reviews: