8
9
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Hardware Used
10. Insert blade (H) through the slot in the motor
assembly (F), aligning the three screw holes in
the blade (H) with the screw holes in the motor
assembly (F). Secure blade (H) using blade
screws (AA).
8. Twist wire ends together and screw wire connectors
(BB) on in a clockwise direction. Tape wire connectors
(BB) and wires together with electrical tape (not
included).
11. Remove one of the three screws from the
support plate preassembled underneath the
motor assembly (F). Loosen but do not remove
the other two screws.
9. Slide the canopy (B) up to the ceiling and over
the two screws on the mounting bracket (A).
Rotate the canopy (B) to lock it in place, then
secure with previously loosened/removed
screws.
12. Pass the
BLUE
and
WHITE
wires from the
motor assembly (F) through the center hole
of the fitter plate (G). Align the two keyslots in
the fitter plate (G) with the two screws in the
support plate below the motor assembly (F).
Place the fitter plate (G) over the two loosened
screws and turn the fitter plate (G) clockwise
until it locks. Re-install the previously removed
screw, then tighten all screws securely.
7. Insert receiver from the remote pack (L) into mounting
bracket (A) with the flat side toward the ceiling.
Connect the
GREEN/GROUND
wire from fan to the
BARE/GROUNDED
supply wire. Connect the
BLACK
wire (AC IN L) from the receiver to the supply
BLACK
wire. Connect the
BLACK
wire (TO MOTOR L) from
the receiver to the
BLACK
wire from fan. Connect
the
WHITE
wire (AC IN N) from receiver to the supply
WHITE
wire. Connect the
WHITE
wire (TO MOTOR
N) from the receiver to the
WHITE
wire from fan.
Connect the
BLUE
wire (FOR LIGHT) from receiver
to the
BLUE
wire from fan.
WARNING:
Be sure no bare wire or wire strands are
visible after making connection. Place
GREEN
and
WHITE
connections on opposite side of box from
the
BLACK
and
BLUE
(if applicable) connections.
The splices should be turned upward and pushed
carefully up into the outlet box.
L
Black
White
Ground/Green
Ground/Green
White
White
Blue
Black
Black
F
A
7
H
H
AA
F
10
8
11
B
Screw
Outlet box
9
12
x 6
Wire Connector
BB
BB
Screw
Support plate
Screw
G
F
Repeat for the remaining blade assemblies.
Hardware Used
AA
Blade Screw
x 16
Lowes.com/harborbreeze
Lowes.com/harborbreeze
Page 8
Page 9
