HAPRO Mobile Sun HP8540, User Manual

Page: 9 / 67

Duration of the
tanning session for
each separate part of
the body
For persons with
very sensitive skin
For persons with
normal sensitive
skin
For persons with
less sensitive skin
9th session 10 minutes 20 minutes 30 minutes*
10th session 10 minutes 20 minutes 30 minutes*
*) or longer, depending on your skin sensitivity.
Preparing for use
- You can easily move and store the appliance in transport position.
- The appliance is easier to lift if you do so together with another person (Fig. 2).
- If you have to lift the appliance by yourself, use the handle (Fig. 3).
1 To open the appliance, move the slides in the direction of the arrow (Fig. 4).
2 Pull up the stand and the lamp unit (Fig. 5).
3 Put the tanning appliance in the position indicated (Fig. 6).
4 Pull up the lamp unit to horizontal position. Use the handle to do this. (Fig. 7)
You hear clicks when you move the lamp unit past certain fixed positions.
Note: Instead of using the above step-by-step method, you can also pull the lamp unit up by its
handgrip in one single movement (Fig. 8).
5 Turn the lamp unit a quarter turn (Fig. 9).
6 Place the tanning appliance beside a bed. (Fig. 10)
The distance between the UV filter and the surface on which you are lying down (e.g. the bed)
must be 90cm.
7 Slide the collar down the stand to unlock the height adjustment lock. Pull up the lamp
unit at the same time to a height of 90cm above the bed. Let go of the collar to lock the
lamp unit into position (Fig. 11).
- You can check the distance between the lamp unit and the bed by pulling out the
measuring tape.
- The measuring tape automatically rewinds when you move the red tab sideways.
The appliance is now ready for use.
Using the appliance
1 Fully unwind the mains cord.
2 Put the plug in the wall socket.
3 Consult chapter ‘Tanning and your health’ and your own notes for the correct tanning
time.
4 Put on the protective goggles.
- Only use these protective goggles when you tan with a Hapro tanning appliance. Do not
use them for other purposes.
- The protective goggles comply with protection class II according to directive 89/686/EEC.
5 Set the timer to the appropriate time for the tanning session (Fig. 12).
The maximum tanning time that can be set is 45 minutes.
ENGLISH
7