After unpacking your Happyhotfeet, you will need to connect them to the 230V char-
ger. They will need to be charged for 3-4 hours before your first use. Plug the adapter
cables to the back of both of the Happyhotfeet insoles to charge them.
Please note
that both of the insoles must always be charged at the same time!
The switch
must be set to the “OFF” position when charging the insoles. After the initial charge,
the regular charging time is approximately 3-4 hours long. The LED light on the adap-
ter turns red during charging and then it turns green after the charging is completed!
After the insoles are fully charged, your Happyhotfeet insoles are now ready to be
used!
After charging:
the first thing to do is to synchronies your insoles to the remote control:
1. When the switch is to the left, the insole is off and the remote will not work.
2. To synchronise your insoles centre the switch. The LED will flash and the insoles
are now ready to be synchro- nized. Simply press a button on the remote and
from now on you can use the remote to control your insoles.
3. When the switch is to the right, the insole will turn on and stay on at a medium
heat level.
Note: the remote will not work in this setting.
Your insoles are now synchronized. Note: The high-quality 1900 mAh LI-ION polymer
batteries do not get damaged from frequent charging and can be recharged approxi-
mately 500 times! When using your Happyhotfeet insoles, press the button H on the
remote and the blue LED light will turn on the insoles to the high level.
If you want to change levels, just hit the following buttons:
High level
– Press the ”H” button
Medium level
– Press the ”M” button
Low level
– Press the ”L” button
Before placing your insole in your shoes or boots, please remove any existing insoles
in order to guarantee a perfect fit for your Happyhotfeet insoles. The Happyhotfeet
insoles for men come in sizes of 41-46 and for women 35- 40.
The sizes are located on the bottom of the insole. Once you have located your size,
you will have to cut the insole along the line of the where the size is located.
Caution: Please use caution while cutting and do not cut beyond the solid line
or excessively bend the insoles! This will cause damage to the heating elements
and your Happyhotfeet insoles.
USER/CARE MANUAL – RM-1-60-2V
