Page
8
of
12
Step 8: Insert the slats (11) to hardware parts N and O then press into the base making sure they are secure.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 9: Insert the small base panel (9) and large base panels (10).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 10: Attach the bed base to the hydraulic frames using hardware part M. Fix the bolts starting from area 1
and finishing in area 3 – do not fully tighten the bolts yet.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
10
10
10
9
M
1
2
3
N
O
11
11
N
