G
2x
12
16
Step 7:
To assemble part D, it is a must to make sure the hole go into the right position as shown in (NOTE). And before tighten
the screw, please make sure part G is in same alignment in between left and right side of part G.
DO NOT
use any power tools as this may damage the bed frame and will invalidate any claims.
Page 8 of 10
* Please insert the screw balance in the middle of the hole.
D
G
14
7
D
Do Not Use Power Tools
7 JCBC M8 x 45mm
6 pcs
12 M8 Hex Nuts
6 pcs
14 Allen Key M5
1 pc
16 M8 Spanner
1 pc
Top View